ZHEJIANG PNTECH TECHNOLOGY CO., LTD
Powering Solar Futures: Reliable Cables & Connectors, Direct from Source. Solar Energy’s Backbone: Engineered for Efficiency, Built to Last.
Add to Cart
TUV EN50618 XLPE insulation tinned copper 10mm2 solar cable for solar system
Photovoltaic solar cable (PV cable) is used for power transmission in junction box of solar panel, transfer between photovoltaic panel and power confluence box, also used for wind-energy and track laying of power station.
Mainly used in rugged outdoor environment.
Material
Conductor: soft annealed stranded tinned copper
Insulation: 125℃ electron-beam cross-linked insulation material XLPE
Jacket: 125℃ electron-beam cross-linked insulation material XLPE
Insulation, jacket are use the halogen-free electron-beam cross-linked material, with excellent softness, heat-resistance, cold resistance, wear-resistance, oil resistance, acid & alkali resistant, waterproof, UV-resistance and high fire-resistant, environment-friendly, the service life over 25 years.
| Type | Cross Section | Strand Design | Conductor Diameter | Conductor Resistance | Outer Diameter | Rated Voltage | Rated Current |
| H1Z2Z2-K 1x10mm2 | 10mm2 | 80x φ0.4mm | 4.4mm | 1.95 Ω/km | 7.4mm | 1500VDC | 98A |
Application :
Specifically designed for connecting photovoltaic system components inside and
outside of building and equipment with high mechanical requirements and extreme weather
conditions .For permanent installations.
General characteristics:
Cable made of electron-beam cross-linked insulation and coating; high resistance against heat , cold, oil, abrasion, ozone,UV and weather; with improved reaction in case of fire . low smoke, halogen free , flame free ,
flame retardant; flexible, easy to strip, very low space requirement, extremely, extremely
mechanically robust, very long lifetime.
Outstanding Advantages :
1. Dual wall insulation.Electron beam cross-linked
2. Excellent resistance to U.V,oil,greases,oxygen and ozone
3. Excellent resistance to abrasion
4. Halogen free, flame retardant,low toxicity
5. Excellent flexibility and stripping performance
6. High current carring capacity
7. TUV approved
| Product Name | TUV Standard Solar Cable |
| Model NO. | H1Z2Z2-K 1x 10mm2 |
| Voltage | High Voltage Cable |
| Insulation Material | XLPE |
| Material Shape | Round Wire |
| Certification | ROSH, CE, TUV |
| Standards | TUV EN50618 |
| Cores | 1 Core |
| Transport Package | Iron-Wooden Drum, Iron Drum |
| Application | Construction, Underground, Industrial, Power Station |
| Sheath Material | XLPE |
| Wire Core Material | Tinned Copper |
| Cross Section | 10mm2 |
| Name | PV Cable |
| The product description | Widely used in indoor and outdoor solar installations, electrical installation, indoor and outdoor, explosion-prone areas, factories, industrial and agricultural industries. |
| Product features | Low smoke without halogen, good cold, ultraviolet, ozone - resistant and weather - resistant. |
| Flame retardant, cutting resistance and penetration resistance. | |
| Cable protection level Ⅱ level. | |
| With 150 ℃ photovoltaic cable radiation as insulation materials, halogen free flame retardant is halogen-free, non-toxic modified polyethylene thin hengjing resin as the main raw material, add halogen-free, non-toxic, flame retardant, heat stabilizer, eliminate smoke agent, preservative, such as fertilizer, does not contain halogen, heavy metals, phosphorus. | |
| It conforms to ROHS, and the insulation resistance is small after immersion. | |
| Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km |
| 2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm | |
| 3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω. | |
| Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
| 25, 16 and 10, 6, 4, 2 mm ^ 2 PV wire | |
| Insulation: > 0.5mm thick with low smoke and halogen material, and meet the specified limit of the customer. | |
| Sheath: low smoke and halogen free material thickness > 0.5mm. | |
| Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
| The highest temperature of conductor: 120 ℃ (allow 5 s in short circuit temperature 200 ℃) | |
| Limited voltage: AC0.6/1kv dc1.8kv. |
(We also produce single core of 2.5mm2,4mm2, 6mm2 and 16mm2, as well as dual cores,
please consult me directly if necessary)
Pictures of 10mm2 solar Cable
